HomeProductsInclined belt conveyorInclined belt conveyor AM-R

Inclined belt conveyor AM-R

The inclined belt conveyor AM-K is a particularly robust belt conveyor.

Its aluminium frame is 95 mm high and provided with groove profiles which can be used for easily attaching any accessories.

As a standard, the belt conveyor AM-R is equipped with a cleated chain made of plastic modules, lateral guide rails and a feeding hopper with a fall-back flap. The cleats may be 1, 2 or 3 inches high and their distance on the conveyor between one another can be freely selected in 1-inch steps.

The plastic module chains of the AM-R have been approved by the FDA and are easy to clean. In addition, they are particularly hard-wearing and easy to maintain thanks to the possibility of replacing individual links.

The feeding hopper is available in a small and a large standard design.

The two pivotable double stands made of aluminium, which are displayed here together with the belt conveyor AM-R, are infinitely adjustable in height. For an optimal positioning the stand on the feed end is equipped with small fixed rollers. The stand on the discharge end is provided with two dead stop safety wheels. Alternatively, the AM-R can also be used with a mobile H-shaped pillar stand.

Request quote!
Or call us directly under: +49 (0) 2461 / 93767-0

Technical Specifications and Accessories:

Useable belt widths:
182, 258, 334, 410, 486 und 562 mm. Further widths are available upon request.

Distance between axes / Length:
600 to 6,000 mm. Any desired lengths are available.

Drive unit with constant belt speed:
V = approx. 5.6 / 10.4 / 15.6 / 20.8 / 31.2 or 44.6 m/min.
Further belt speeds are available upon request.
Supply for 220/240 - 380/415 V, 50 Hz. Protection type IP 54.
This drive unit can be delivered ready to be connected including a protective motor switch with an emergency stop and a power line of 2 meters length with a CEE plug. Protection type IP 54.

Drive unit with infinitely adjustable belt speed:
V = approx. 2.2-7.8 / 4.2-14.6 / 6.2-21.8 / 8.3-29.1 / 12.5-43.7 or 17.8-62.4 m/min.
Further belt speeds are available upon request.
The belt is delivered with a connected digital frequency controller, ready to be plugged in for 230 V, 50 Hz. Protection type IP 65.

Geared motor position: 
The geared motor can be placed pulling on the left or right side and can be turned in single steps by 90°.

Total belt load: Standard load 30 kg. Higher loads are available upon request.