HomeProductsInclined belt conveyorInclined belt conveyor GAL-60-B

Inclined belt conveyor GAL-60-B

The bunker-conveyor GAL-60-B has, depending on its size, a hopper with a capacity between 20 and 205 litres. The maximum weight in the hopper can be 100 kg. The height of the hopper’s back wall can be 200, 300 or 400 mm.

Its characteristic quality is the ability to hold bulk material ready and to be integrated into work processes. It is furthermore available with different belt speeds, so that the carrying capacity can be influenced in order to match the customer’s requirements. It is possible to fix supplementary accessories on the whole length of the 60 mm high frame of the GAL-60-B by the aid of sliding blocks with an M-8 thread along both sides of the conveyor.

Besides this, the bunker-conveyor GAL-60-B is equipped with an extremely rigid TorsioDur frame. It is obtainable in standard widths of 200, 300 and 400 mm and in lengths of 500, 1000 and 1500 mm.

You will find more information on available accessories under the column "Lot of Accessories". In its standard version, the GAL-60-B is placed on a single steel column support with aluminium ground plate.

If the conveyor has to transport higher loads it can be placed on two double uprights. Both systems are continuously adjustable in height and pivotable.

Request quote!
Or call us directly under: +49 (0) 2461 / 93767-0

Technical Specifications and Accessories:

Belt widths:
200, 300 and 400 mm. Other belt widths are possible on request.

Distance between axes / length:
500, 1000 and 1500 mm. Other lengths are possible.

Height of bunker back wall:
200, 300 and 400 mm. Other heights are possible.

Drive with constant belt speed:
v = approx. 0,2 / 0,5 or 0,8 m/min.
Other belt speeds are possible on request. Connection for 220/240 - 380/415 V, 50 Hz. Protection type IP 54. This drive can be supplied together with a motor protection switch incorporating an emergency off. It has a 2 metre supply cable and CEE plug and is of protection type IP 54.

Drive with infinitely adjustable belt speed:
v = approx. 0,09-0,33 / 0,2-0,75 or 0,35-1,25 m/min.
Other belt speeds are possible on request. The drive is supplied together with a frequency regulator that is ready to be plugged to 240V 50 Hz and has a protection type of IP 65. The frequency controller incorporates a digital motor protection switch.

Geared motor position:
Pushing below the belt or at its side, on the left or right.

Total belt load:
30 kg to 100 kg, depending on the hopper size.