HomeProductsLots of AccessoriesBelt typestandard belt types for different conveying tasks

tandard belt types for different conveying tasks

Various belt types and qualities are recommended depending on the type of conveyor and the conditions of each application. The belt is therefore always chosen after individual discussion of special requirement profiles and the place of application with the customer.

The following belt types are offered within the 24-hour delivery service:

Belt for accumulation operation, model G-1:
This belt is used if transported parts are to accumulate at the end of the conveyor. Due to its upper side consisting of a silver-coloured fabric structure, this model has good gliding qualities. Hence, neither the belt nor the parts are damaged when the parts accumulate at the end. The G-1 belt has two layers of polyester fabric and is heat-resistant up to a temperature of 80°C.

Versatile standard belt, model G-3:
This belt is recommended as a standard belt. It is very robust due to its two layers of polyester fabric and its hard PVC coating on the upper surface. It is heat-resistant up to a temperature of 80°C. The G-3 model has limited antistatic properties and has a green surface. It has reasonable adhesion and it is therefore also possible to use it on shallow inclines of up to 10°.

Slatted belt for gradients, G-3-ST model:
The technical construction of the basic material is identical to that of the G-3 model. The G-3-ST has cross slats on the upper surface, which are available in heights of 20, 30 or 40 mm. The distance between each of the slats on the belt can be selected individually but must be at least 50 mm.

Adhesive belt with nap structure, G-4 model:
This belt is recommended for shallow inclines and for heavy surface stress. It is based on two layers of polyester fabric and has a blue-green PVC coating on the upper surface. This coating is finished in a nap structure, which is available as "Supergrip" in a higher version and as "Minigrip" in a flatter version. The nap structure gives the G4 model good cut-resistance. It is therefore particularly recommendable for conveying sharp-edged parts. This belt can be used up to a temperature of 80°C.

Variants of the standard belt model G-3 for the food industry:
The G-3 model is available in other colour versions as well and can be obtained in white finish with FDA approval for the food industry. The surface is made of polyurethane and the belt is fully resistant against oil and grease.

The following standard belt models are available outside the 24-hour delivery service:

Belt with corrugated edge, model G-3-ST-W:
The G-3 standard belt designed with a polyurethane surface is equipped with cross slats and corrugated edges made of polyurethane for conveying very small parts or bulk material. The height of the corrugated edges and slats as well as the distance between the slats can be custom made depending on the operating conditions. The white version of this belt with FDA approval can also be used for the food industry.

Heat-resistant belts, silicone belt and felt belt:
Special belts are used for transporting particularly hot materials. Belts with a felt surface can be used up to a temperature of 120°C. Belts made of silicone can be used up to a temperature of 170°C.

Other belts are available upon request.